!!!WARNING!!!

please read

 

Any product will break if misused, abused, overused, or not maintained properly!

 

The Ultimate Tow and Recovery Ropes

will not be held responsible for these actions!

 

Please, always use all products properly, in a safe manner

and for the application which they are intended.

 

Breaking Strength
Breaking strength is the average force at which the product, the condition it would leave the factory, has been found by representative testing to break, when a constantly increasing force is applied in direct line to the product at a uniform rate of speed on a standard pull testing machine. Remember: Breaking strengths were obtained under controlled lab conditions. Listing the Breaking Strength does not mean the Working Load Limit should ever be exceeded.

Regular Inspections
Inspect product regularly for visible damage, wears and tears. The need for inspections cannot be overemphasized. No product can keep operating at its rated capacity indefinitely. Periodic inspections help determine when to replace a product and reduce hazards.  Inspect products prior to each use.

Do not try to pull out tree stumps, or trees with our ropes. They are not intended for that use. These ropes are intended only for vehicles/equipment with proper hooking systems!

 

ALWAYS USE SCREW-PIN CLEVIS' THAT HAVE THE PROPER WEIGHT RATING FOR THE ROPEAND VEHICLE YOU ARE USING. NEVER USE DROP-PIN CLEVIS' OR ANY TYPE OF HOOK. THESE ARE UNSAFE BECAUSE THEY CAN COME UNATTACHED FROM VEHICLE OR ROPE CAUSING SERIOUS INJURY OR DEATH!

 

NEVER HOOK OUR ROPES TOGETHER OR WITH CHAINS, STRAPS, OR ANYTHING ELSE. THIS CREATES AN UNSAFE CONDITION AND DRASTICALLY LOWERS THE BREAKING STRENGTH.

 

 

IMPORTANT WARNINGS

 

FAILURE TO FOLLOW WARNINGS AND INSTRUCTIONS CAN RESULT IN SERIOUS INJURY OR DEATH.